- ADP-BERS-140
- ADP-CH44-140
- ADP-HIPT-140
- ADP-HKCP-140
- ADP-HKSP-140
- ADP-JUDG-140
- ADP-LRLG-140
- ADP-LRSM-140
- ADP-S637-140
- ADP-SIGM-140
- ADP-TRIR-140
- BAK-1220-300
- BAT-0G13-140
- DLT-0006-000
- FSL-0650-140
- FSR-00V2-140
- FSM-0PLW-140
- FSM-00QD-140
- HPT-0650-140
- K-15
- K-50
- LBS-HULK-140
- LBS-0006-140
- LBS-1722-140
- LBS-SIX6-PAK
- LRS-0650-CCW
- LRS-0650-SCS
- LRS-0650-SSW
- LT-1
- LT-PRO
- MNT-0900-180
- NAA-1
- PLB-0001-140
- PLR-0006-140/PLR-0006-090
- PLW-0006-140/PLW-0006-090
- PB-1/PB-1T/PB-1G/PB-2/PB-3
- QDL-65GB-730
- QDL-65SW-730
- RL-1
- RL-MP
- RL-KA
- RL-1022
- RL-MK
- RL-PF
- RL-RP
- RL-TM
- RL-TS
- RLS-0650-140
- SLA-0001-140
Q: What guns will the ADP-HKSP-140/ADP-HKCP-140 fit?
A: The ADP-HKSP-140 adapter will only work on the H&K USP and the full size USP models. The ADP-HKCP-140 will only work on the H&K USP Compact.
Q: What will fit on the ADP-HKSP-140/ADP-HKCP-140?
A: FSR-00V2-140, FSM-00QD-140, LRS-0650-SSW, FSL-0650-140, LL-1 and WL-1.
Q: Why do I need this adapter for my H&K USP?
A: The H&K USP rail system does not allow a laser to be mounted because the grooves do not extend all the way to the end of the barrel. Because of that, a laser is not able to be mounted onto the rail system. The ADP-HKSP-140/ADP-HKCP-140 turns the rail system into a Picatinny/ Weaver type rail system which does allow a laser to be mounted.
Q: How does the adapter stay in place?
A: The ADP-HKSP-140/ADP-HKCP-140 fits snug into the grooves of the rail system of the H&K USP then there are two screws to tighten the adapter to the rail.
Q: How far will the APD-HKCP-140 and laser hang down on my gun?
A: If mounting a FSL-0650-140 onto the adapter, the laser will hang down approximately 1” from the rail grooves of the gun. If mounting a LRS-0650-SSW onto the adapter the laser will hang down approximately 1 ½” from the rail grooves of the gun.