- ADP-BERS-140
- ADP-CH44-140
- ADP-HIPT-140
- ADP-HKCP-140
- ADP-HKSP-140
- ADP-JUDG-140
- ADP-LRLG-140
- ADP-LRSM-140
- ADP-S637-140
- ADP-SIGM-140
- ADP-TRIR-140
- BAK-1220-300
- BAT-0G13-140
- DLT-0006-000
- FSL-0650-140
- FSR-00V2-140
- FSM-0PLW-140
- FSM-00QD-140
- HPT-0650-140
- K-15
- K-50
- LBS-HULK-140
- LBS-0006-140
- LBS-1722-140
- LBS-SIX6-PAK
- LRS-0650-CCW
- LRS-0650-SCS
- LRS-0650-SSW
- LT-1
- LT-PRO
- MNT-0900-180
- NAA-1
- PLB-0001-140
- PLR-0006-140/PLR-0006-090
- PLW-0006-140/PLW-0006-090
- PB-1/PB-1T/PB-1G/PB-2/PB-3
- QDL-65GB-730
- QDL-65SW-730
- RL-1
- RL-MP
- RL-KA
- RL-1022
- RL-MK
- RL-PF
- RL-RP
- RL-TM
- RL-TS
- RLS-0650-140
- SLA-0001-140
Q: Why would I use the SLA-0001-140?
A: The SLA-0001-140 is designed to help make sure your scope is mounted level onto the firearm before bore sighting.
Q: How does your SLA-0001-140 work?
A: You simply slide the SLA-0001-140 onto the end of your bore tool that is already in the bore of your gun. Turn your bore sighter on and the SLA-0006-140 will turn the laser dot into a laser line on the wall. By using the leveling bubble located at the top of the SLA-0001-140, make sure the laser line is level on the wall. Look though you scope and make whatever adjustments are needed so the scope horizontal line is in alignment with the laser line. When that is complete you know the scope is mounted level onto the firearm and you can bore sight your gun.
Q: Will your SLA-0001-140 fit on my LBS-0006-140?
A: Yes, our SLA-0001-140 will fit any of Laseryte’s bore tools.
Q; How does the new Gun leveler part of the SLA-0001-140 work?
A: You simply slide the Gun leveler onto the rail where you will be attaching your scope. By using the level bubble located at the top of the tool, level your gun. This lets you know that you have a nice level gun before mounting your scope.